Agilenano – News: Why California Residents Could See Even More Blackouts This Wildfire Season

California utility Pacific Gas & Electric may need to rely even more heavily on forced blackouts this year to prevent its grid from starting more deadly wildfires like the ones that drove it into bankruptcy. 

In a statement emailed to GTM, PG&E insists it’s not behind schedule on its 2020 wildfire-mitigation work. But according to data released last week as part of its first-quarter earnings report, the utility still has a long way to go in areas like grid hardening, vegetation clearing, physical inspections, and installation of specialized gear on its distribution and transmission system. 

Meanwhile, the inspections that PG&E has done in the past year have been sharply criticized by U.S. District Court Judge William Alsup, who last week ordered the utility to adhere to much more stringent processes for inspecting its power lines. Alsup’s order described PG&E’s reports on its work to date as a “mere courtroom prop,” concealing failures to trim trees that are clearly in danger of striking distribution lines or to replace worn equipment on high-voltage transmission towers.

But the judge’s orders to expand PG&E’s inspection workforce come at an extraordinary time. The coronavirus pandemic is causing problems for fire-prevention and utility work statewide.

For PG&E, COVID-19 restrictions and economic disruptions “will continue to result in workforce disruptions, both in personnel availability (including a reduction in contract labor resources) and deployment,” the utility wrote in a filing. 

Making matters worse, Northern California’s meager rain and snowfall this winter and spring could lead to a fire season that’s more dangerous and begins earlier than it did last year. That leaves PG&E little time to catch up on its work. 

It also increases the possibility that many of its customers will still be confined to their homes under coronavirus restrictions, depending on the state’s reopening plans and the course of the pandemic over the coming months, said Michael Wara, the head of Stanford University’s Climate and Energy Policy Program and a member of Gov. Gavin Newsom’s Wildfires Blue Ribbon Commission.

That could complicate plans to help elderly or medically vulnerable people who face hardship or even death without power by bringing them to generator-powered community shelter sites, or to quickly deploy the field crews needed to meet California regulators’ demands for this year’s power shutoffs to last no more than 24 hours, Wara said in an interview this week. 

“My question, looking at this data, is whether PG&E is clearly communicating with the state, with local governments, with the [state’s] Office of Emergency Services, and with Cal Fire,” the state’s firefighting agency, “in terms of how the pandemic is going to affect operations,” Wara said. “I’m hopeful, but I’m concerned.”  
Much wildfire mitigation work yet to be done
PG&E has incurred about $2.6 billion in costs for its 2019 wildfire-mitigation work and expects to incur another $2.7 billion in related costs this year. But the utility revealed last week that the roughly $700 million it has spent so far this year has yielded minimal progress on its goals as of March 31. 

As of March 31, PG&E had completed 32 percent of its planned tree trimming and removal along 1,800 miles of distribution lines, and 19 percent of its work to replace poles and cover or bury bare wires along 241 miles of lines. 

PG&E is also moving slowly on technology to better predict and pinpoint parts of the grid under the highest fire threat. At the end of March, it had installed 16 percent of the 592 grid-sectionalizing devices it will use to isolate and minimize power outages, and deployed fewer than one in 10 of the 400 weather stations to measure wind speeds and humidity, and 200 high-definition cameras for spotting broken equipment or fires as they’re happening. 

The only portion of its wildfire plan where PG&E has exceeded its plan to date is in acquiring emergency backup generators for communities at highest risk of having their power cut off for days at a time — 450 megawatts of them, compared to the 300 megawatts it planned for. 

Credit: PG&E

Wara pointed out that it’s harder for PG&E to do work in the first quarter, given that winter conditions can prevent work from happening across much of its mountainous and forested territory at higher wildfire risk. Utilities also tend to do more work on planning their annual course of work during the winter months, leaving more on-the-ground work for the spring and summer. 

“On the other hand, we had an extraordinarily mild winter this year,” Wara said, with far lower snowfall than usual in the Sierra Nevada region, which has also increased wildfire risk expectations for this year. 

This difference in weather from last year to this year could make it difficult for PG&E to reduce the scope of its fire-prevention blackouts this year, Wara said. 

In an email, PG&E spokesman Matt Neuman said the utility is currently on track to meet its 2020 wildfire mitigation plan targets, and is on schedule for all of the categories of work except its distribution grid sectionalization program, which is being reconfigured to reach its full deployment by Sept. 1.

In its Q1 presentation, PG&E stated that its backup generators, grid sectionalizing and transmission line repairs and distribution line inspections it’s done should reduce the number of customers affected by blackouts by about one-third — but there’s a big caveat. The reduction in blackouts would come only “if the exact same weather patterns are seen in 2020 as experienced during the largest [public-safety power shutoff] events in 2019.” 

That’s “significant,” Wara said. “Last fire season was a pretty light fire season, and it had a very late start. We’re now headed into a fire season that’s likely to be much more severe, and with an earlier start.”

California’s other two utilities, Southern California Edison and San Diego Gas & Electric, have a better record of grid hardening and wildfire mitigation work, and used fire-prevention blackouts at far smaller scales last year. 

PG&E’s preparedness for wildfire mitigation was brought further into doubt in last week’s order from Judge Alsup, who oversees the utility’s criminal probation for convictions related to the deadly 2010 San Bruno natural-gas pipeline explosion. Alsup’s order (PDF) flatly states that “PG&E remains years away from compliance with California law and with its own wildfire mitigation plan.”

Alsup ordered PG&E to put its own employees to work alongside subcontractors to get the work done more quickly.
Transmission line concerns could widen de-energization impacts 
Alsup also excoriated PG&E’s high-voltage transmission tower inspection process. Days before the Nov. 2018 Camp Fire, inspectors failed to discover the worn “C-hook” that broke and allowed a 115-kilovolt transmission line to contact the tower, creating sparks that caused the fire. Later inspections found 32 other C-hooks on the same line that needed immediate replacement. 

Inspections in 2019 may also be suspect, Alsup wrote. Last year, a 230 kV transmission line in Sonoma County was cleared in three separate PG&E inspections, “once by drone, once by climbing, and once by ground” crews. But during an October windstorm, a jumper cable that routes power flow around a transmission tower broke loose, a failure that’s suspected of causing the Oct. 2019 Kincade fire. 

That 230 kV line remained energized amidst a broader de-energization of lower-voltage transmission and distribution systems in the area. Cal Fire hasn’t announced the fire’s cause, but PG&E’s Q1 report noted it has set aside $600 million in anticipation of covering damages it caused — a figure at “the lower end of the range” of potential losses. 

“Like a broken record, PG&E routinely excuses itself by insisting that all towers had been inspected and any noted faults were addressed,” Alsup wrote. “But these transmission tower inspections failed to spot dangerous conditions.” He ordered PG&E to record the age and specific condition of inspected transmission equipment, videotape every inspection, and require all contractors doing the work to carry insurance to cover public losses in event of a wildfire. 

PG&E is under pressure to win court approval of its bankruptcy plan by June 30 as a precondition of being allowed to access a $21 billion state wildfire insurance fund considered critical for its future financial stability. But any fires caused by its equipment after its Jan. 2019 bankruptcy filing and before its emergence from bankruptcy, now slated for the end of August, would not be eligible for being covered under that fund. 

This opens the possibility that PG&E may be compelled to consider de-energizing higher-voltage transmission lines as it responds to windy, dry conditions that guide its wildfire-prevention outage decisions this summer and fall, Wara said. “Before the Camp fire, PG&E didn’t turn off any transmission. After the Camp fire, they turned off the 60 kV and 115 kV in high-risk areas — and the Kincade fire ignited.” 

“I think the biggest upcoming question for this fire season is what happens with transmission,” he said. “I hope the stringency of the inspections [has] increased significantly in the past few years, given the errors” described in Alsup’s order, to give PG&E the confidence that it can keep higher-voltage power lines energized during high-wind events. 

Doing otherwise “could have a much more systematic impact on generation available for load [and] on resource adequacy in various parts of the state,” Wara said. “We need to be talking about that and doing an analysis to make sure we’re OK.” 

This story has been updated to include comments from PG&E regarding the schedule of its wildfire mitigation plan.
#GridEdge,Regulation&Policy,GridOptimization,Utilities,News,
GridEdge

Agilenano – News
Source: https://agilenano.com/blogs/news/why-california-residents-could-see-even-more-blackouts-this-wildfire-season

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s